HOW TO : 6 shapers perm technique in combination with a cutting technique

HOW TO : 6 shapers perm technique in combination with a cutting technique

Posted by


Hereby we introduce our new perm Ecowave from
Royalkis In this movie I am gonna show you how to do
a perm with 6 shapers in combination with a cutting technique before you start with the perm, wash the hair
with keraclean volume shampoo, don’t use a conditioner. I start with the cutting technique. Section the fringe in one part and twist the hair. In this case you will create a round layer. Cut a straight line with a point cut . When you comb the hair down you will see that you created your round layer Make a straight line just behind the ear from
the highest point of the head. Do this on both sides. Secure the hair at the backside with hair
clips. Overdirect the left side to the right side
and work with a mid section on top of the hair. Divide your fringe in half and comb this towards
you, use this part as your guide. Make the connection with a point cut. Do exactly the same on the other side. With this cutting technique you create a soft
layering in the front of the face. From here you are going to cut the backside. Divide the hair in 2 sections. When you work with thick hair you can divide the back part into 3 sections. with the comb control technique i am going to cut a straight line Make the connection of the top part with your
line underneath. The position of the head is straight up. Now you can start with your 6 shapers perm
technique. Go back to the highest point of the head and
make a straight line behind the ear. Comb the complete section upwards and make
sure the hair is smooth. Im working with a middle thick shaper but
you can also work with smaller or thicker shaper. It just depends what kind of end result you
want. It is important that you use rolling paper
in the whole section. After every paper I use a new one underneath. The rolling paper gives you a better aborbsion
of the perm liquid into your hair. Use a hairclip on top of your shaper to secure. In this case it will be not in your way when
you place your second shaper. Again place several rolling papers behind
each other. After wrapping the second shaper you can remove
the hairlip from the first shaper and close it Now you have 2 shapers on top of the head. Divide the hair in a midsection and create
a straight line 1,5 Inches above the accipitel bone. Comb the hair straight up and repeat what
you did with the other shapers. my model has coloured hair. Im going to use ecowave number 1 which. is for normal , fine and coloured hair. We also have a number zero and this. Version is for resistant and hard to perm
hair. The ecowave is ammonia and thioglycolate free. It contains keratin for long lasting hold
and Bamboo for enduring ,flexibility and strength. And it has an appealing scent. When you have to work with resistant hard
to perm hair you use number 0. I have a tip to make wrapping of resilient
hair easier. After washing apply keramoist treatment and
leave in for 3 minutes. Rinse thoroughly. The keramoist treatment will soften the hair
ensuring the texture lotion will be absorbed as you can see, i used 6 shapers. Before im going to use the texture lotion
I want to protect the rest of the hair. For this I use cotton. Im using ecowave number 1 and im starting
in the neck area. Moisten the hair with drops its importend
that the hair slowly absorb the perm lotion. Apply the lotion over and over again and make
sure it reaches the lengths and ends for optimum result. Bamboo extract in the royal kis ecowave provides
long lasting flexibility and support. The difference in the hair structure are equalised
for even curls whilst hair is strengthened by closing the cuticle. Hygroplex
An effective combination of proteins and moisturisers provides extra care and shine , ideal for
extra volume or long lasting strong waves. You can check if the hair is full with loting
by pulling a shaper upwards and when you see little bells you know for sure you used enough. Ill choose to work without heat so im using
a plastic cap with an extra towel on top. When you want to use a climazon or hairmaster
leave the hair uncovered. After 5 minutes do a check on one of the shapers
to see if the desired result is achieved. If necessary add extra time up to maximum
processing time of 20 minutes. The maximum time with heat is 15 minutes. After 16 minutes I decide to rinse. Rince
for 5 minutes. With a towel I squeeze the water out of the
hair and doing this shaper by shaper. The royal ecofix is ready to use. Apply 2/3 of the fixation directly from the
bottle or apply with a sponge the shapers , starting at the neck area. After 5 minutes remove all the shapers carefully
and apply the remains ecofix lotion on to the hair. Process for 3 to 5 minutes , then rinse thoroughly
for 3 minutes. apply kerabalance acidifier and squeeze it
into the curls. Do not pull. Rince after 3 minutes. Use a small amount of kerashield leave in
for maximum protection do not rinse. The hair is now ready to be dried or styled
as desired. Im going to use a diffuser and choose keramousse
for maximum bounce of the curl. An easy way to dry the hair is upside down. To fix the curls we used Royal KIS AECOSOL SPRAY. Here the result of the 6 shapers techniek
with the ecowave from royal kis

Leave a Reply

Your email address will not be published. Required fields are marked *